COLLECTION / CASE 03 — COLLECTOR BOOSTER

For the box you won't open.

Built to the footprint of a Magic: The Gathering Collector Booster box. Eight-millimetre UV-filtering acrylic, a magnetic lid that closes with a single soft click, and clearance cut so the shrink-wrap never touches a wall.

UV ACRYLIC 8 MM LID — MAGNETIC FITS — MTG COLLECTOR BOOSTER BOX

Find a stockist

See the specs

Collector case with a Magic collector booster box inside

CASE 03 — COLLECTOR BOOSTER

ACRYLIC — 8 MMLID — MAGNETICUV — ~99% FILTEREDBASE — NON-MARKING FEETSTACKS — TWO HIGH

01 — THE FIT

Cut for one box, not for most boxes.

A universal case is a compromise in both directions — too loose to display well, too tight to load without scraping a corner. This one is measured to the Collector Booster footprint with a deliberate millimetre of clearance on every face.

Collector booster box inside the case, lid off

Empty case with the magnetic lid lifted clear

02 — THE LIGHT

Sunlight is what fades set symbols.

Collector boxes are printed to be looked at, which means they get shelved where the light is. The acrylic filters roughly 99% of UV between 300 and 400 nm — the band that takes the colour out of print — while staying optically clear.

Full specifications

Measured against the box, then built with a millimetre to spare.

Every figure below is measured, not marketed. If a number matters to you and isn't here, ask us — we like collectors who check.

Also in the collection

All six cases →